• DSA-SDI digital input safety barrier (with SIL functional safety) DSA-SDI digital input safety barrier (with SIL functional safety)

DSA-SDI digital input safety barrier (with SIL functional safety)

Item No: DYT12168127

Quick Overview

Get best and cheap DSA-SDI digital input safety barrier (with SIL functional safety) from circuitsell.com with Fast Delievry and Free Worldwide Shipping...

Availability: In stock

$200.00

$69.99

* Required Fields

Order within and your item will ship out today

Details

DSA-SDI digital input safety barrier (with SIL functional safety)

Functional safety meets SIL 2 of IEC 61508. 1 in 1 out, 1 in 2 out, 2 in 2 out. Contact switch, NAMUR proximity switch, OC signal or level signal, intrinsically safe input. Line fault detection alarm function. Relay contact output, OC signal or level signal output.

·  The DSA-SDI digital input barrier is suitable for OC, level, contact switch or NAMUR proximity switch input in hazardous areas on site. After isolation, it is transmitted to the control system of the safety zone or other instruments by relay contact output (or OC output, level output).

·  Functional safety up to SIL 2 of IEC 61508.

·  Available in multiple channel styles (optional).

·  Line fault detection function (optional).

· This product requires a separate DC power supply. Power-input-output and isolation between channels.

 Model /Selection Table:

     Option

    Model and code

     Description

     Basic model

    DSA-SDI

     Digital input barrier

     Channel form

        11

     1 in 1 out

        12

     1 in 2 out

        22

     2 in 2 out
     (Dual channel, the code combination for input signal and output signal is -CC option, see the following selection example 2)

      Special features

        W

     No line fault detection alarm function 
     (Code W is only for the selection of the input signal code -C, if the code W is not selected,indicates that there is a line fault detection function)

   

     Default, no special features

      Input signal

        -C

     NAMUR proximity switch or contact switch

        -O

     OC signal

        -L

     Level signal

        -Z

     Special order

     Output signal

         C

     Relay (normally open) contact

         O

     OC signal

         L

     Level signal

         Z

     Special order

    Power supply voltage

       -V1

     Power supply (terminal) 20 ~ 32VDC

       -V2

     Power supply (rail) 20~32VDC (special power supply DIN rail required)

    Service Code

     -QC9A

     Yutong Product Service Code

   Selection example 
   Example 1: DSA-SDI11W-CC-V1-QC9A ...... (1 in 1 out, digital input safety barrier, wireless path fault detection function, input is contact switch or NAMUR proximity switch, output is relay contact (normally open ), terminal power supply 20 ~ 32VDC)
   Example 2: DSA-SDI22-CC-V1-QC9A ...... (2 in 2 out, digital input safety barrier, line fault detection function, input is contact switch or NAMUR proximity switch, output is relay contact (normally open ), terminal power supply 20 ~ 32VDC)
   Example 3: DSA-SDI11-LL-V1-QC9A ...... (1 input and 1 output, digital input safety barrier, level signal input, level signal output, terminal power supply 20~32VDC)
   Example 4: DSA-SDI11-OC-V2-QC9A ...... (1 input and 1 output, digital input and output, OC signal input, relay contact output, rail supply 20 to 32 VDC) 
   Optional accessories
     Dedicated power supply DIN rail: PSDR-3000 series

             

Technical data:

Size:

    Width

    14.5mm

    Height

    102.6mm

    Depth

    124mm

    Housing Material / Color

     PC(Polycarbonate)+PPT Material / Black Gray

    Protection level

     IP20

  

Environmental conditions:

    Ambient temperature

    -20~60℃

    Ambient temperature (storage or operation)

     -40~80℃

    Ambient humidity (operation)

     5~95RH (no condensation)

Input (intrinsically safe):

   Input Type

     NAMUR Proximity Switch or Contact Switch, OC, Level

   Open circuit voltage

     8V±0.5V

   Switching threshold

     1.5±0.2mA

   Switch hysteresis

     ≤0.1mA

   Open circuit current / short circuit current

     <0.1mA / <5±1mA

  

Output:

   Relay contact output

   Contact Type

     NO Contact

   Contact capacity

     30VDC1A

   Load Type

     Resistive Load

   Response time

     ≤10ms

   OC signal output

   External power supply (Vcc)

     ≤40V

    Drive current

     ≤40mA

    Collector output

     High level Vcc, low level ≤2.5V

    Emitter output

     High level Vcc-2.5V, low level ≤0.5V

    Load resistance

     2KΩ≤RL≤20KΩ

   Level signal output

    24V system PLC/DCS

     High level: 16V≤VH≤24V

    12V system PLC/DCS

     High level:  9V≤VH≤12V

    5V system PLC/DCS

     High level:  4.5V≤VH≤5V

    Low level

     ≤0.5V(when the drive current is ≤10mA)

    Load resistance

     ≥1KΩ

 

Power supply:

   Rated supply voltage

    24VDC

   Power supply voltage range

    20~32VDC

  Maximum current consumption

    <14mA (1 in 1 out); <20mA (1 in 2 out); <25mA (2 in 2 out)

  

General parameters:

   Electrical isolation

     Input-output-power supply: 2500V AC RMS / 1 minute

   Electromagnetic compatibility (EMC)

      in accordance with IEC 61326-1 (GB/T 18268), IEC 61326-3-1

   LED status indication

     ·Power on, the product model on the panel is clearly visible through the LED backlight perspective, white.
    ·Red LED, line fault indication, red light when there is a line fault.
    ·Yellow LED, output status indication, output relay contact is closed, yellow light is on.

    Applicable occasions

      Installed in a safe place, can be connected with intrinsically safe equipment in Zone 0, Zone 1, Zone 2; IIC, IIB, IIA; T4~T6 danger zone

   Field device suitable for connection

     OC, level, contact switch, proximity switch

   Mounting method

      Horizontal or vertical mounting, can be mounted on standard 35mm DIN rail (or dedicated busbar backplane powered DIN rail)

 

Wiring parameters:

   Rigid conductor cross section (min/max)

    0.5mm²/2.5mm²

   Flexible conductor cross section (min/max)

    0.5mm²/2.5mm²

   Minimum Conductor Cross Section (AWG))

    24

   Maximum Conductor Cross Section (AWG) 14

    14

   Stripping length

    7mm

   Connection type

    M3 screw fastening connection

   Screw torque

    Up to0.6Nm

 

Explosion-proof parameters:

    Maximum safety voltage (Um)

    250VAC/DC

   Maximum output voltage (Uo)

    11.5VDC

   Maximum output current (Io)

    16.8mA

   Maximum output power (Po)

    48.3W

   Maximum external inductance (Lo)

    50mH

   Maximum external capacitance (Co)

    0.8μF

  

Certification/Standards:

   CE certification

    in line with CE standards

   National Explosion-proof Electrical Product Quality Supervision and Inspection Center (CQST) certification

    [Ex ia Ga] IIC conforms to GB 3836.1, GB 3836.4, GB 3836.20

Product drawing / terminal wiring diagram:

        

Product Image Details

DSA-SDI digital input safety barrier (with SIL functional safety) 1

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please Log In or Register

Product Questions

  • Submit your question to our community.


Our customers love us

  • High Quality With Global Standards.
  • Convenient and friendly customer service.
  • Fast and safe shipping around the globe.
  • Free Shipping Worldwide - Each Order, and no any tax!