XS-TP11BJ Universal signal alarm setter

    Option

    Model and code

     Description

    Basic model

    XS-TP11BJ

     Universal Signal Alarm Setter

    Input signal

        -U

     General purpose signal (RTD,TC, mV, mA)

    Output signal

         A

     4~20mA

         B

     0~20mA

         Z

     Special order

    Power supply voltage

       -V1

     Power supply (terminal) 20～32VDC

       -V2

     Power supply (rail) 20～32VDC (special power supply DIN rail required)

    Service Code

    -QC9A

     Product Service Code

   Selection example 
   Example 1: XS-TP11BJ-UA-V1-QC9A
     ...... (General signal alarm setter, 4~20mA output + one set of relay contact alarm output, terminal power supply 20~32VDC) 
   Example 2: XS-TP11BJ-UA-V2-QC9A 
     ...... (General signal alarm setter, 4~20mA output + one set of relay contact alarm output, rail supply 20~32VDC) 
  Indication 
   1. Please indicate the signal type and range when ordering. Otherwise, it will be shipped according to the default setting: with power distribution, input signal 4~20mA, output signal 4~20mA. 
   2. If you select a rail-powered product, please order a dedicated DIN rail. 
   Optional accessories 
  ·  Configuration software: CRFW-2000, CRFA-1904 
  ·  Calibration interface: CR-2206, FAIF-1904 
  ·  Dedicated power supply DIN rail: PSDR-3000 series

     Width

    14.5mm

     Height

    102.6mm

     Height

    100mm

     Housing Material / Color

    PC (Polycarbonate) + PPT Material / Black Gray 

     Protection level  

    IP20

     Ambient temperature

    -20~＋60℃

     Ambient temperature (storage or operation)

    -40~＋80℃

     Ambient humidity (operation)

    5~95％RH (no condensation)

     Available sensor types（RTD）

    Pt100，Cu50 and other thermal resistance

     Available sensor types（TC）

    K，E，S，B and other thermocouples

     Temperature measurement range

    Depends on sensor type

     Millivolt signal

    0~100mV

     Current signal

    0/4~20mA

     Distribution voltage to the transmitter

    ≥17V (at20mA)

   Current output signal

    4~20mA ;  0~20mA

   Maximum current output signal

    22mA(±1mA)

   Current Output Load

    Adaptive Load 0~300Ω (factory default)

   Output ripple

    <10mV p-p

   Alarm output

    Relay contact

   Contact capacity

    12V,1A

   Load Type

    Resistive Load

     Rated supply voltage

    24VDC

     Power supply voltage range

    20~32VDC

     Maximum current consumption

    ＜60mA

   Standard accuracy

    Typical values±0.1%FS

   Zero migration range

    -10~100mV or 0~385Ω

   Range migration range

    3.8~100mV or 12.8~400Ω

   Output resolution

    <3.8~100mV or 12.8Ω~400Ωrange, 1μA

   Load change effect

    ±2μA

   Wire resistance effect

    Thermal resistance three-wire input(≤10Ω/line), <±0.005 %/Ω

   Thermocouple input cold junction compensation error

    ±0.5~1℃ (compensation range -15~+75℃)

   Temperature drift

    · -10~35mV range: 0.0005% or 0.6μV (whichever is larger) 
    · -10~75mV range: 0.0005% or 1.2μV (whichever is larger) 
    · 10~400Ω range: 0.0015% or 4mΩ (whichever is larger)

   Power-on or storage time drift

    ±2μA (180days)

   Response time

    <10ms

   Power-on stabilization time

    <1s

   Maximum withstand voltage

    Input-output-power supply: 2500V AC RMS / 1 minute

   Protection parameters

    ·  Power-on shock protection, power-on slow start >20ms
    ·  Distribution protection, distribution output clamp current 28mA (±4mA)
    ·  Reverse power supply protection, reverse voltage -30V
    ·  Output protection, output clamp current 22mA (typical)
    ·  Port misconnection and surge protection:
      A. The power-input-output between the two ports of the self-loop can withstand the external loop voltage <±24V.
      B. Input-output-power supply can withstand 2500V RMS/1 minute without damage.
      C. The short circuit or open circuit formed by the misconnection of the terminal is not damaged.

   Electromagnetic compatibility (EMC)

    In accordance with IEC 61326-1 (GB/T 18268), IEC 61326-3-1

   LED indication

    Green LED (power indication)

   Field device suitable for connection

    Thermal resistance or thermocouple temperature sensor, millivolt signal, transmitter or current source signal

   Mounting method

    Horizontal or vertical mounting, can be mounted on standard 35mm DIN rail (or dedicated busbar backplane powered DIN rail)

   Rigid conductor cross section (min/max)

    0.5mm²/2.5mm²

   Flexible wire cross section (min/max)

    0.5mm²/2.5mm²

   Minimum wire cross section (AWG)

    24

   Maximum wire cross section (AWG)

    14

   Stripping length

    7mm

   Connection type

    M3 screw fastening connection

   Crew torque

    up to 0.6Nm

    CE certification

    Meet CE standards