XSA-RTD Thermal resistance input barrier (analog type)

    Option

    Model and code

     Description

    Basic model

    XSA-RTD

     Thermal resistance input barrier

    Channel form

        11

     1 in 1 out

        12

     1 in 2 out

    Input signal

        -R

     Thermal resistance（Pt100，Cu50）

        -Z

     Other special thermal resistance

    Output signal

         A

     4~20mA

         B

     0~20mA

         Z

     Special order

   Power supply voltage

       -V1

     Power supply (terminal) 20～32VDC

       -V2

     Power supply (rail) 20~32VDC (special power supply DIN rail required)

     Service Code

    -QC9A

     Product Service Code

 Selection example 
   Example 1:  XSA-RTD11-RA-V1-QC9A ...... (1 input and 1 output, thermal resistance input safety barrier, output signal 4~20mA, terminal power supply 20~32VDC)
   Example 2:  XSA-RTD12-RA-V2-QC9A ...... (1 input and 2 output, thermal resistance input safety barrier, output signal 4~20mA, rail supply 20~32VDC)
   Example 3:  XSA-RTD11-RZ-V1-QC9A ...... (1 input and 1 output, thermal resistance input safety barrier, output signal 1~5V, terminal power supply 20~32VDC) 
   Indication
   1. Please indicate the signal type and range when ordering.
   2. If you select a rail-powered product, please order a dedicated DIN rail.

Optional accessories
Dedicated power supply DIN rail: PSDR-3000 series

    Width

    14.5mm

    Height

    102.6mm

    Depth

    100mm

    Housing Material / Color

    PC(Polycarbonate)+PPT Material / Black Gray

    Protection level

    IP20

    Ambient temperature

   -20~＋60℃

    Ambient temperature (storage or operation)

    -40~＋80℃

    Ambient humidity (operation)

    5~95％RH (no condensation)

   Input signal

    Pt100, Cu50 and other thermal resistance

   Temperature measurement range

    depends on sensor type

   Current output

    4~20mA；0~20mA

   Maximum output current

    22mA(±1mA)

   Current Output Load

    Adaptive Load 0~300Ω (factory default)

   Output ripple

     <10mV p-p

   Output status when input overload or disconnection

    Output current <3.5mA (lower limit) or >21mA (upper limit)

  Rated supply voltage

    24VDC

   Power supply voltage range

    20~32VDC

  Maximum current consumption

    <35mA (1 in 1 out); <60mA (1 in 2 out)

   Standard accuracy

     Typical value±0.1%FS

   Zero migration range

     0~385Ω

   Range migration range

    12.8~400Ω

   Output resolution

     12.8Ω~400Ω range, 1μA

   Load change effect

     ±2μA

   Temperature drift

     Typical values are 0.0015% or 4mΩ of the input maximum (whichever is greater)

    Power-on or storage time drift

      ±2μA (180 days)

    Response time

      <10ms

   Power-on stabilization time

      <1s

   Maximum withstand voltage

     Input-output-power supply: 2500V AC RMS / 1 minute

   Protection parameters

     · Power-on shock protection, power-on slow start >20ms   

     · Distribution protection, distribution output clamp current 28mA (±4mA)
     · Reverse power supply protection, reverse voltage -30V
     · Output protection, output clamp current 22mA (typical)
     · Port misconnection and surge protection:
     A.The power-input-output between the two ports of the self-loop can withstand the external loop voltage <±24V.       

     B. Input-output-power supply can withstand 2500V RMS/1 minute without damage.       

     C. The short circuit or open circuit formed by the misconnection of the terminal is not damaged.

   Electromagnetic compatibility (EMC)

      in accordance with IEC 61326-1 (GB/T 18268), IEC 61326-3-1

   LED indication

     Green LED (power indication)

   Applicable occasions

     Installed in a safe place, can be connected with intrinsically safe equipment in Zone 0, Zone 1, Zone 2; IIC, IIB, IIA; T4~T6 danger zone

   Field device suitable for connection

     Thermal resistance temperature sensor

   Mounting method

     Horizontal or vertical mounting, can be mounted on standard 35mm DIN rail (or dedicated busbar backplane powered DIN rail)

   Rigid conductor cross section (min/max)

    0.5mm²/2.5mm²

   Flexible conductor cross section (min/max)

    0.5mm²/2.5mm²

   Minimum Conductor Cross Section (AWG))

    24

   Maximum Conductor Cross Section (AWG) 14

    14

   Stripping length

    7mm

   Connection type

    M3 screw fastening connection

   Screw torque

    Up to0.6Nm

   Maximum safety voltage (Um)

    250VAC/DC

   Maximum output voltage (Uo)

    7.2VDC

   Maximum output current (Io)

    8.68mA

   Maximum output power (Po)

    15.62mW

   Maximum external inductance (Lo)

    5mH

   Maximum external capacitance (Co)

    6μF

    CE certification

   in line with CE standards

   National Explosion-proof Electrical Product Quality Supervision and Inspection Center (CQST) certification

   [Ex ia Ga] IIC conforms to GB 3836.1, GB 3836.4, GB 3836.20